ESWARI(ANAND) Fuses offers wide range of transformer protection fuses in accodance to DIN & BS standard.Back up fuses are generally used for protecting transformer in the distribution network between 3.3kv/3.6kv to 33kv/36kv.These fuses are capable of breaking any fault current between the minimum breaking current(l3)and therated breaking current(l1).Selection of the fuse sall be made from the selecton table and in accordance to the standards.
ESWARI (ANAND) Fuses range transformer protection are available in the following series,
NGT Series:Comply with DIN 4325 of VDC 0670 T4 & IEC 60282-I Standard
C-O series: Complay with BS 2692 & IEC 60282 -standard. Fitted with End tags for rigid Bolt & Nut fixing
RGT Series:Fitted with TA3 Tag arrangement for rigid Bolt & Nut fixing
BHT Series :Comply with BS 2692 & IEC 60282-1Suitable for installation in Oil insulated (Oil immersed ) switchgear.
NGT Series Fuses
Our range of Fuse For Protection Of Semiconductors is the oldest protective devices used in the electrical industry. It is based on the principle of low melting point of a piece of wire that melts at the point of defect of an electric circuit.
© Hydro Electricals. All Rights Reserved (Terms of Use)